metal double sheet detector MDSC-8200S
- The controller can connect two sensors simultaneously, with a built-in storage for 200 sets of sheet material recipes. It is capable of detecting magnetic conductive metal plates with a thickness of 0.2-4mm, and supports communication methods such as Profinet, 485 and terminal control.
-
Detection Thickness
Magnetic Materials0.2-4.0mm
Features
Built-in Sheet Material Storage Recipe
200 groups
Fast Response Speed
Up to 200 pcs/min
One controller connected to 2 sensors
Capable of simultaneous double-stamping-process stack detection
Supports Communication
Supports Profinet and 485 Communication
Specifications
| Main Unit Specifications | |||
| Response Speed | 200pcs/min | ||
| Operating Voltage | 24V DC，+6V/-2V | ||
| Power Consumption | 60W（ Measurement :Less than 60 W, Idle :Less than 12 W） | ||
| Inrush Current | 5A 1ms | ||
| Ambient Temperature | 0℃~50℃ | ||
| Size | Main Unit | 132 x 116 x 48(mm) | |
| Cutout Size for Embedded Mounting | 121 x 105 (mm) | ||
| Protection Rating | Rear Housing | IP20 | |
| Front Panel Housing | IP65 | ||
| Weight | 540g | ||
| Features |
200 recipe groups
9 opto-isolated input(s) with a common terminal 4 NPN or PNP outputs, max load: 48 VDC, 50 mA RS485 interface; configurable in system settings |
||
| Main Unit Dimensions |  |
||
| Sensor Specifications | |||
| Magnetic Material Measurement Range | 0.2~4.0mm | ||
| Ambient Temperature | 0℃~60℃ | ||
| Protection Rating | IP65 | ||
| Weight | 350g | ||
| Sensor Cable | Plug-in, 16 m (custom length available) | ||
| Sensor Dimensions |  |
||
Note: Products are continuously being innovated and their performance is continually enhanced. The technical specifications provided are for reference only.
Downloads
